Build Instructions - Base
Step 1.1
Click/tap the thumbnails to select an image.
Click/tap the main image for a full size view.
Tools
2 mm Allen Key
Parts
2x Chassis Beams
2x Centre Beam Spacers
2x End Beam Spacers
8x M3 x 12 mm Button Screws
8x M3 Nuts
Stages
Attach the 2 centre beam spacers to the beams using 4x button screws and 4x nuts.
Attach each end beam spacer to the beams using 4x button screws and 4x nuts. Make sure the flat sides face outwards.
Notes
The centre beam spacers are designed to hold weights (available from Wickes ) if extra stability is needed.
Step 1.2
Tools
Glue
Parts
1x Base
1x Chassis (from Step 1.1)
Stages
Glue the base to the chassis.
Caution
Avoid glueing the centre spacers as these may need to be loosened to add weights.
Step 1.3
Tools
5.5 mm Spanner or Small Pliers
Parts
1x Base + Chassis (from Step 1.2)
2x Centre Buffers
2x Buffer Beams
Stages
Screw a buffer into one of the buffer beams until the thread protrudes out the back slightly.
Line the buffer thread up with the hole in one end spacer of the chassis.
Add the nut to the back of the end spacer and screw the buffer up tightly.
Repeat for the other end.
Notes
The buffer beams can also be glued to the chassis end spacers.